Siemens OZW772 Series Commissioning Instructions Download Page 138

Page: 138 / 176

138 / 176

Siemens

Web server OZW772... V6.0

CE1C5701en

Building Technologies

Trend functions

2015-10-12

9.7.2 ACS trend bus load

The bus load of an ACS trend is displayed at a fixed value of 20%. This
corresponds to the maximum possible load.
A trend written via ACS automatically changes to the status established by the
trend definition.

The bus load of an ACS trend is displayed with the current value.
The trend automatically changes to the state established in the trend definition.

The trend is only started for a trend definition of "Running" if the resulting overall
bus load does not exceed 100%.

ACS V9.00 or older

ACS as of V9.01

Note

Summary of Contents for OZW772 Series

















































































































































































Search results

Summary of Contents for OZW772 Series

Reviews:

Related manuals for OZW772 Series

Brands by name

Popular brands

Siemens OZW772 Series, Commissioning Instructions

Search results

Summary of Contents for OZW772 Series

Reviews:

Related manuals for OZW772 Series

Brands by name

Popular brands