Siemens OZW772 Series Commissioning Instructions Download Page 135

Page: 135 / 176

135 / 176

Siemens

Web server OZW772... V6.0

CE1C5701en

Building Technologies

Trend functions

2015-10-12

4. In the following window,

Browse

to select the file with the desired trend

definition.

5. Click

Open

to confirm.

6. The name of the selected file is displayed.

7. Click

to confirm.

8. The data point address must be changed in the following window if the

device of the trend definition for import does not match with the device on
the plant; true even if the data point matches (the data point address is
specific to the device).

9. Select checkbox.
10. Select the desired data point address from the drop-down list.

11. Confirm with

In the display example, the address 0.2.230 is retained since it is an import
within the same device.

12. You can check the settings for import in the following window and change

as needed.

Summary of Contents for OZW772 Series

















































































































































































Search results

Summary of Contents for OZW772 Series

Reviews:

Related manuals for OZW772 Series

Brands by name

Popular brands

Siemens OZW772 Series, Commissioning Instructions

Search results

Summary of Contents for OZW772 Series

Reviews:

Related manuals for OZW772 Series

Brands by name

Popular brands