Siemens MXL-IQ, Operation, Installation, And Maintenance Manual

Page: 62 / 180

3-12
Operation
If you press RESET before acknowledging
all conditions and silencing the audible
alarms, the display shows a message
similar to the following:
ALARMS NOT ALL ACKNOWLEDGED YET
(or)
SUPERVISORY NOT ALL ACKNOWLEDGED YET
(or)
SECURITY NOT ALL ACKNOWLEDGED YET
(or)
TROUBLES NOT ALL ACKNOWLEDGED YET
(or)
AUDIBLES NOT ALL SILENCED YET
If your System has a printer, it prints a
message similar to the following and adds
SYSTEM NOT RESET on the bottom line:
RESET 0:1 1:58 Jul 03,20XX
Not All Acknowledged Yet. System Not
Reset.
When the System performs a Soft Reset,
the display shows the following message:
SYSTEM RESET
The System then returns to Normal mode
and the display shows the following:
11:59:59 DEC 31, 20XX SYSTEM
[custom System message] NORMAL
If your System has a printer, it prints the
following message:
SYSTEM RESET
If the System is already in Normal mode
when you press RESET, it displays
SYSTEM ALREADY NORMAL
and does not reset.
U sing The MKB
Keyboard/Annunciator
Panel in Global Mode
The Global MKB Keyboard/Annunciator
Panel operates the same as described
in Using The MKB Keyboard/Annunciator
Panel Local Mode, except as noted below.
Limitations/Restrictions
• As in all networked MXL Systems, the
self-restoring trouble option is not
allowed in any MXL.
• An MXL still may only contain a maxi-
mum of 4 supervised MKBs. This can be
a mix of local and global MKBs.
• BLOCK ACK must be enabled in the
CSG-M.
• The maximum number of supervised
Global MKBs is 10.
• The maximum number of Global Printers
is 2 (not TSP-40s).
Global MKB Display Format
In order to insert the XNET node informa-
tion and provide an indication of the number
of events in the System, some of the
characters in the first and second lines
have been lost.
NN = NODE # (1 - 64)
MMM = MODULE # (1 - 253)
DDD = DEVICE # (1 - 254)
ALARM
The 3 event displays are formatted as
follows for an alarm condition:
NN:MMM-DDD [custom message] ACK
1 [time/date] IN ALR
NN:MMM-DDD [custom message] ACK
1 [device type] IN ALR
ALARMS=1 SUPERVISORY=0
SECURITY=0 TROUBLES=0