11-1
ET 200L, ET 200L-SC and ET 200L-SC IM-SC Distributed I/O Device
EWA 4NEB 780 6009-02c
SC Analog Electronic Modules –
Parameters
Section
Topic
Page
11.1
Parameters of the Analog Input Modules
11-2
11.2
Notes on the Parameters of the Analog Input Modules
11-4
11.3
Default Parameters of the Analog Input Modules
11-6
11.4
Behavior of the Analog Input Modules
11-7
11.5
Conversion and Cycle Times of the Analog Input Channels
11-8
11.6
Connection of Thermocouples
11-9
11.7
Connecting Non-Isolated Voltage Sensors
11-14
11.8
Connecting Current Sensors
11-15
11.9
Connecting Resistance Thermometers and Resistors
11-17
11.10
Floating Measuring Sensors
11-18
11.11
Wiring Unused Inputs of Analog Input Modules
11-19
11.12
Parameters of the Analog Output Modules
11-20
11.13
Notes on the Parameters of the Analog Output Modules
11-21
11.14
Default Parameters of the Analog Output Modules
11-22
11.15
Behavior of the Analog Output Modules
11-23
11.16
Conversion, Cycle, Settling and Response Times of the Analog
Output Modules
11-24
11.17
Connecting Loads/Actuators to Analog Outputs
11-26
11.18
Wiring Unused Analog Output Modules
11-28
11.19
Analog Value Representation in S7 Number Format
11-29
11.20
Analog Measurement Ranges for Input Channels in S7 Number
Format
11-30
11.21
Analog Value Representation for Analog Input Modules in S7
Number Format
11-32
11.22
Analog Output Ranges for Output Channels in S7 Number Format
11-37
11.23
Analog Value Representation for Output Modules in S7 Number
Format
11-39
11.24
Analog Value Representation in S5 Number Format
11-41
11.25
Analog Measurement Ranges for Input Channels in S5 Number
Format
11-43
11.26
Analog Value Representationfor Analog Input Modules in S5
Number Format
11-45
11.27
Analog Output Ranges for Output Channels in S5 Number Format
11-50
11.28
Analog Value Representation for Output Modules in S5 Number
Format
11-52
Contents of the
Chapter
11
