Siemens Gigaset S675IP User Manual Download

Page: 48 / 164

SMS (text messages)

Gigaset S675 IP / IM-NORD EN / A31008-M1915-R201-1-PG19 / sms_BRD_neutral.fm / 6.8.07

ion 4,

.09.

2005

Or:

§Options§

Open menu.

Delete Entry

Press

§OK§

. The selected SMS

message is deleted.

You can use

§Options§

Delete all

to delete

every SMS in the draft message list.

Writing/changing an SMS

You are reading an SMS in the draft

message list.

§Options§

Open menu.

You have the following options:

New SMS

Write a new SMS and then send

(page 45) or save it.

Edit

Edit the text of the saved SMS and then

send it (page 45).

Character Set

Text is shown in the selected character

set.

Sending SMS messages to an e-mail

address

If your service provider supports the SMS

to e-mail feature, you can also send your

SMS messages to e-mail addresses.
The e-mail address must be at the begin-

ning of the text. You must send the SMS to

the e-mail service of your SMS send cen-

tre.

SMS

(Mailbox, mailbox

PIN)

New SMS

Load the e-mail address from

the directory or enter it

directly. End the entry with a

space or colon (depending on

the service provider).

Enter the SMS text.

§Options§

Press the display key.

Send

Select and press

§OK§

E-mail

Select and press

§OK§

. If the

number of the e-mail service is

not entered (page 50), enter

the number of the e-mail serv-

ice.

§Send§

Press the display key. The SMS

will be sent as soon as your

phone's fixed line network

connection is free.

Receiving an SMS

All received SMS messages are saved in

the incoming message list.
Since an SMS remains in the list even after

it has been read, you should

regularly

delete SMS messages from the list

The display tells you if the SMS memory is

full.

Delete SMS messages you no longer

require (page 48).

Incoming message list

The incoming message list contains:

All received SMS messages, starting

with the most recent.

SMS messages that could not be sent

due to an error.

SMS status messages, if the status

report is activated (page 46).

New SMS messages are signalled on all

Gigaset S67H handsets by the

icon in

the display, the flashing message key

and an advisory tone.

Opening the incoming message list with

the

key

Press.

Select a mailbox if necessary and enter the

mailbox PIN.
The incoming message list is displayed as

follows (example):

Bold:

number of new entries

Regular:

number of read entries

2 Name of mailbox, here: general mailbox

Open list with

§OK§

SMS: (2)

1
2

Summary of Contents for Gigaset S675IP





































































































































































Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands

Siemens Gigaset S675IP, User Manual

Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands