Siemens Gigaset S675IP User Manual Download

Page: 51 / 164

SMS (text messages)

Gigaset S675 IP / IM-NORD EN / A31008-M1915-R201-1-PG19 / sms_BRD_neutral.fm / 6.8.07

ion 4,

.09.

2005

Setting up and changing a personal

mailbox

Setting up a personal mailbox

SMS

Settings

SMS Mailboxes

Select mailbox, e.g.

Mailbox 2

and press

§OK§

Change multiple line input:

On/Off:

Activate or deactivate mailbox.

ID:

Select mailbox ID (0–9). You can only

select the available numbers.

Protection:

Activate/deactivate PIN protection.

PIN

If necessary, enter 4-digit PIN.

Save changes (page 127).

Active mailboxes are marked with

the mailbox list. They are shown in the

SMS list and can, if necessary, be displayed

by pressing the message key

Deactivating a mailbox

Set

On/Off:

Off

. Confirm

message with

§Yes§

if necessary.

All

SMS messages saved in this mailbox

will be deleted.

Deactivating PIN protection

Set

Protection:

Off

The mailbox PIN is reset to "0000".

Changing the name of a mailbox

SMS

Settings

SMS

Mailboxes

(Select mailbox)

§Edit§

Press the display key.

Enter new name.

§Save§

Press the display key.

Press

and

hold

(idle status).

Changing a mailbox's PIN and ID

SMS

Settings

SMS

Mailboxes

(Select mailbox)

Enter mailbox PIN if required

and press

§OK§

Set

ID:

Protection:

and

PIN

(page 50).

Sending an SMS to a personal mailbox

To send an SMS to a personal mailbox, the

sender must know your ID and enter it

after your number.

You can send your SMS contact an SMS

via your personal mailbox.

Your SMS contact will then receive your

SMS number with current ID and can save

it in their directory. If the ID is invalid, the

SMS will not be delivered.

Setting SMS centres

Entering/changing SMS centres

You should find out about the services

and special functions offered by your

service provider

before you make a

new application

and/or before you

delete pre-configured call numbers.

SMS

Settings

Service Centres

Select SMS centre (e.g.

Service

Centr. 1

) and press

§OK§

Change multiple line input:

Active Send:

Select

Yes

if SMS messages are to be

sent via the SMS centre. For the SMS

centres 2 to 4, the setting only applies

to the next SMS.

SMS:

Press the display key

§Edit§

. Enter the

number of the SMS service and insert a

star if your service provider supports

personal mailboxes.

E-mail:

Press the display key

§Edit§

. Enter the

number of the e-mail service.

‰

Summary of Contents for Gigaset S675IP





































































































































































Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands

Siemens Gigaset S675IP, User Manual

Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands