89
Operating the base station on the PABX
Gigaset S675 IP / IM-NORD EN / A31008-M1915-R201-1-PG19 / settings_bs_hs_pabx.fm / 6.8.07
Ve
rs
ion 4,
16
.09.
2005
Activating/deactivating display
of VoIP status messages
If the function is activated, a VoIP status
code for your service provider is displayed.
Activate the function if, for example, you
have problems with VoIP connections. You
will receive a provider-specific status
code, which supports the service when
the problem is analysed. You will find a
table with the possible status screens in
v
¢
Ð
¢
Telephony
¢
VoIP
~
Enter the system PIN and press
§OK§
.
Show Stat. on HS
Select and press
§OK§
(
= on).
Checking the base station
MAC address
Depending on your network configura-
tion, you may have to enter your base sta-
tion MAC address, for example, into your
router's access control list. You can check
your base station MAC address:
v
N 5 O 2 Q
The base station MAC address is displayed.
a
Press
and
hold
(idle status).
Operating the base station
on the PABX
The following settings are only necessary
when your PABX requires them; see the
PABX user guide. The settings only con-
cern fixed line network connections.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
Setting recall
You can set the recall option.
v
¢
Ð
¢
Telephony
¢
Fixed Line
¢
Recall
q
Select recall and press
§OK§
.
The current setting is indicated by .
a
Press
and
hold
(idle status).
Setting pauses
Changing pause after line seizure
You can set the length of the pause
inserted between pressing the talk key
c
and sending the phone number.
v N 5 O
L
~
Enter a number for the length
of the pause (
1
= 1 sec.;
2
= 3 sec.;
3
= 7 sec.) and
press
§OK§
.
a
Press
and
hold
(idle status).
Please note:
You can find notes on the IP address and the
subnet mask on page 95 and in the glossary on
Please note:
For how to make the setting on the Web con-
figurator, see page 117.
‰
‰
