Siemens Gigaset S675IP User Manual Download

Page: 57 / 164

Operating the base station answer machine

Gigaset S675 IP / IM-NORD EN / A31008-M1915-R201-1-PG19 / answering_m.fm / 6.8.07

ion 4,

.09.

2005

You can cancel playback by pressing

”

Please note:

Recording ends automatically if the

maximum recording time of 170 sec-

onds is exceeded or there is a break in

speech for more than 2 seconds.

If you cancel the recording, the previ-

ously recorded announcement will be

deleted. The pre-recorded announce-

ment will be used again.

The recording is cancelled if the answer

machine memory is full.

Delete old messages and repeat

recording if required.

If an external call is received during a

recording for one of the handset's

receive numbers, the recording is inter-

rupted and the call is signalled on the

handset.

Playing back announcements

Voice Mail

Announcements

Play Announce

Play Anc Only

If you have not recorded a personal

announcement, the relevant pre-recorded

announcement is played.

Record a new announcement while play-

ing back the announcement:

§New§

Press the display key. For fur-

ther information, page 55.

Deleting announcements/announce

only

Voice Mail

Announcements

Del Announce

Del Anc Only

§Yes§

Press the display key to con-

firm the prompt.

Press

and

hold

(idle status).

Once you have deleted your announce-

ment, the relevant pre-recorded

announcement will be used again. You

cannot delete the pre-recorded announce-

ments.

Playing back messages

New messages that have not yet been

heard are indicated by the

icon in the

display and by the

key flashing on the

handset.
You can start to play back the messages in

two ways:

Open the answer machine list with the

message key.

If the answer machine is set for fast

access: press and

hold

key

Listening to messages via the answer

machine list

Precondition:

At least one of your hand-

set's send/receive numbers matches the

receive number of a stored message.
The date and time of each message is

logged in the answer machine list (pro-

vided it has been set, page 12) and dis-

played during the playback. If Calling Line

Identification is activated, the caller's

number is displayed. If the caller's number

is saved in the directory, their name is dis-

played.

Press the message key.

Ans M.:

Select and press

§OK§

An announcement informs you if there are

new or old messages.
If there are new messages, playback

begins with the first new message. If the

message has been saved with the date

and time, you will hear an appropriate

announcement before playback begins.

All messages are played back irrespective

of the receive number.

Please note:

All messages are played back irrespective of

their receive number.

Summary of Contents for Gigaset S675IP





































































































































































Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands

Siemens Gigaset S675IP, User Manual

Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands