Siemens Gigaset S675IP User Manual Download

Page: 37 / 164

Network services – VoIP

Gigaset S675 IP / IM-NORD EN / A31008-M1915-R201-1-PG19 / netservices_SAG.fm / 6.8.07

ion 4,

.09.

2005

Activating/deactivating call waiting

Precondition:

Your phone will permit two

parallel VoIP connections (s.

Allow 1 VoIP

call only

on page 102).

If call waiting is activated, a caller on one

of your VoIP connections will hear the

ringing tone if you are already on a call

using this VoIP connection. This call is

announced acoustically and visually on

your handset screen.
Calls on the fixed line connection are not

signalled as call waiting. They are sig-

nalled on other registered handsets to

which the fixed line number has been allo-

cated as a receive number. If no other

handset is available, the caller will hear

the busy tone.
Accepting/rejecting a waiting call, see

page 36.

VoIP

Call Waiting

Status:

Activate/deactivate.

Press the display key

§Save§

Functions during a call

Precondition:

Your phone will permit two

parallel VoIP connections (see

Allow 1 VoIP

call only

on page 102).

Consultation call

During a call:

§Ext.Call§

Press the display key.

~ c

Enter the number or copy

from the directory and

briefly

press/press and hold

the

talk key

The number must be dialled via VoIP.

If the participant answers, you have the

following options:

Toggling:

Use

to toggle between the par-

ticipants.

End call with active participant:

§Options§

End Active Call

Conference call:

Call both participants: press the dis-

play key

§Conf.§

End the conference call (toggling):

press display key

§EndConf§

End call with both participants:

press the end call key

Forwarding (provider dependent):

Precondition:

You are toggling calls

and you phoned the currently active

participant yourself.

To connect the two external partici-

pants:

§Options§

Call Transfer

If call forwarding was successful, a

message will appear to this effect. The

handset will then switch to idle.

Accepting a waiting call

Precondition

: Call waiting is activated

(page 36).

§Accept§

Press the display key.

You have the option of toggling or holding

a conference call.

Please note:

The setting applies to all VoIP phone numbers.

It does not affect the procedure for call waiting

on the fixed line connection. For how to acti-

vate/deactivate call waiting for the fixed line

connection, see page 34.

Please note:

After a few seconds, the number selected for a

consultation call is saved in the last number

redial list.

Please note:

– If the first call was an internal call, the inter-

nal connection is ended.

– An internal call waiting is shown on the dis-

play. You can neither accept the internal

call nor reject it.

Summary of Contents for Gigaset S675IP





































































































































































Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands

Siemens Gigaset S675IP, User Manual

Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands