Siemens Gigaset S675IP User Manual Download

Page: 114 / 164

113

Web configurator

Gigaset S675 IP / IM-NORD EN / A31008-M1915-R201-1-PG19 / web_server.fm / 6.8.07

Enter the user ID (max. 50 characters)

and password (max. 20 characters) that

you used to register with the messen-

ger server in the

Jabber ID

and

Authenti-

cation password

fields. If you have

selected

Messenger Account =

Gigaset.net

, the fields are preconfigured

with your Gigaset.net account.

In the

Jabber server

field, enter the IP

address or the DNS name of the mes-

senger server with which you are regis-

tered for instant messaging.
Max. 74 alphanumeric characters.
If you have selected

Messenger Account =

Gigaset.net

, the field is preconfigured

with the name of the Gigaset.net

server.

Enter the number of the communica-

tion port on the Jabber server in the

Jabber server port

field. The default port

is 5222.
If you have selected

Messenger Account =

Gigaset.net

, the port number is precon-

figured.

Enter a resource name (max. 20 char-

acters) in the

Resource

field.

The default is:

phone

Enter the priority for your phone in the

Priority

field. Select a number between -

128 (highest priority) and 127 (lowest

priority) for the priority.
The default is: 5

Click

Set

Setting up Gigaset.net Jabber account

Your phone is already registered with the

Gigaset.net Jabber server. An account has

been assigned to your phone.
In order to chat with other Gigaset.net

subscribers via this account, you must

transfer the required Gigaset.net subscrib-

ers to a contact list (buddy list) on your PC.

You can use any conventional Jabber cli-

ent for this (e.g. PSI, Miranda; see e.g.

http://www.swissjabber.ch).

Do the following so you can use your

Gigaset.net Jabber account:

Start the Web configurator, open the

Settings

Messaging

Messenger

Web page and select

Messenger Account

Gigaset.net

in the field. Your account

data is displayed in

Jabber ID

and

Authentication password

. You will need

these to create a buddy list via the

Jabber client on the PC.

Start your Jabber client on the PC.

Enter your Gigaset.net

Jabber ID

on the

Jabber client as a new account. The

Jab-

ber ID

consists of your Gigaset.net

number and "@jabber.gigaset.net"
Example:

12345678901#[email protected]

Then enter your

Authentication pass-

word

Now you can enter Gigaset.net sub-

scribers as contacts (buddies).
For the Jabber ID of each subscriber,

enter the subscriber's Gigaset.net

number with "@jabber.gigaset.net"

(example: 2141524901#9@jab-

ber.gigaset.net).

A request to "Add to contact list" will be

sent to the subscriber.
If the subscriber accepts this request, they

will be added to your buddy list. This

updated buddy list will be displayed on the

handset the next time the messenger is

rebooted. To restart: If necessary, close

your connection to the messenger server

(page 65) and then go back online

(page 64).

Please note:

– Do

not

select the option "Create new

account". Your Gigaset.net Jabber account

has already been created in Gigaset.net.

– The option "SSL connection" must be

deac-

tivated

in the Jabber client.

Please note:

For how to use your handset to go online and

chat with or call buddies, see page 63.

Summary of Contents for Gigaset S675IP





































































































































































Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands

Siemens Gigaset S675IP, User Manual

Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands