Siemens Gigaset S675IP User Manual Download

Page: 52 / 164

SMS (text messages)

Gigaset S675 IP / IM-NORD EN / A31008-M1915-R201-1-PG19 / sms_BRD_neutral.fm / 6.8.07

ion 4,

.09.

2005

Save changes (page 127).

Sending an SMS through another SMS

centre

Activate the SMS centre (2 to 4) as the

active send service centre

Send the SMS.

This setting only applies to the next SMS

to be sent. Thereafter, the setting returns

Service Centr. 1

SMS info services

You can have your service provider send

you specific information by SMS (e.g.

weather forecast or the lottery numbers).

A total of up to 10 SMS services can be

saved. You can obtain information about

the SMS services available and their costs

from your service provider.

Setting up/ordering an SMS service

Ordering an SMS service

SMS

SMS Service

Select SMS service.

§Send

Press the display key.

Setting up an SMS service

Select an empty entry for an SMS serv-

ice, deleting an existing entry if neces-

sary. Then:

§Edit§

Press the display key.

Enter the code, name and des-

tination number as appropri-

ate.

§Save§

Press the display key.

Editing the entry of an SMS service

Select SMS service (see page 51).

Then:

§Options§

Open menu.

Edit Entry

Select and press

§OK§

If necessary, change the code,

designation or destination

number.

§Save§

Press the display key.

Deleting an SMS service

Select SMS service (see page 51).

Then:

§Options§

Open menu.

Delete Entry

Select and press

§OK§

SMS on a PABX

You can only receive an SMS when the

Calling Line Identification

for-

warded

to the extension of the PABX

(CLIP)

. The CLIP evaluation of the

phone number for the SMS centre takes

place in your

Gigaset

If required, you must prefix the number

for the SMS centre with the access code

(depending on your PABX).
If in doubt, test your PABX, e.g. by

sending an SMS to your own number:

once with and once without the access

code.

When you send SMS messages, your

sender number may be sent without

your extension number. In this case the

recipient cannot reply to you directly.

Sending and receiving SMS messages

ISDN PABXs

is only possible via the MSN

number assigned to your base station.

Please note:

Ask your service provider for details on how to

enter service numbers if you wish to use per-

sonal mailboxes (precondition: your service

provider supports this function).

Summary of Contents for Gigaset S675IP





































































































































































Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands

Siemens Gigaset S675IP, User Manual

Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands