Siemens Gigaset S675IP Page 118 User Manual Download

Page: 118 / 164

117

Web configurator

Gigaset S675 IP / IM-NORD EN / A31008-M1915-R201-1-PG19 / web_server.fm / 6.8.07

Click the

Set

button to save the settings

in your phone.

Once you have activated synchronisation

the base station will compare time and

date with a time server as soon as an inter-

net connection is established.

Synchronisation will usually occur once a

day (at night) when synchronisation is

activated. A further synchronisation is

made

at every new system start of the base

station (e.g. after a firmware update or

a power cut),

when time settings are changed, e.g.

because you have registered a new

handset with its own time settings on

the base station.

Date and time settings are transferred to

every handset after synchronisation.

Checking status information via
your phone

General information about your phone is

displayed.

In the menu list, click the

Status

tab.

The following information is displayed:

IP Configuration

IP address

The phone's current IP address within

the local network. For assigning the IP

address, see page 94.

MAC address

The phone's device address.

Software

Firmware version

Version of the firmware currently

downloaded. You can download

updates of the firmware on your phone

(page 85). Firmware updates are avail-

able on the Internet.

EEPROM version

Version of your phone's EEPROM stor-

age chip (page 142).

Please note:

– The default time server

"europe.pool.ntp.org" will remain stored in

the base station even if you overwrite it. If

you delete your time server from the

Time

Server

field and synchronisation is still acti-

vated, the base station will return to syn-

chronisation with the default time server.

However, it will no longer appear in

the

Time Server

field.

– The base station will return to synchronisa-

tion with the default time server if you have

entered your own time server in the

Time

Server

field and the base station is unable to

synchronise time and date for ten consecu-

tive attempts.

– If you have deactivated synchronisation

with a time server, and if the date and time

are not set on any handset, then the base

station will attempt to reference date and

time settings from the CLIP information of

an incoming call.

Summary of Contents for Gigaset S675IP





































































































































































Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands

Siemens Gigaset S675IP, User Manual

Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands