Siemens Gigaset S675IP User Manual Download

Page: 46 / 164

SMS (text messages)

Gigaset S675 IP / IM-NORD EN / A31008-M1915-R201-1-PG19 / sms_BRD_neutral.fm / 6.8.07

ion 4,

.09.

2005

SMS (text messages)

You can only send and receive SMS mes-

sages via the fixed line network.
When an SMS is sent, the base station

automatically establishes a connection via

the fixed line network.
Your phone is supplied ready for sending

SMS messages immediately.

Preconditions:

Calling Line Identification is enabled for

your fixed line network connection.

Your network provider supports SMS in

the fixed line network (information on

this can be obtained from your network

provider).

You are registered with your service

provider to send and receive SMS.

SMS messages are exchanged between

SMS centres operated by service provid-

ers. You must enter the SMS centre

through which you wish to send and

receive SMS messages into your phone.

You can receive SMS messages from

every

SMS centre that is entered, provided you

have registered with your service provider.
Your SMS messages are sent via the

Serv-

ice Centr.

that is entered as the

active

send service centre

. However, you can

activate any other SMS centre as the active

send service centre to send a current mes-

sage (page 50).
If no SMS service centre is entered,

the SMS menu only contains the entry

Settings

. Enter an SMS service centre

(page 50).
Information on writing an SMS can be

found in the appendix:

For how to enter text, see page 127.

Writing using the predictive text tool

EATONI, see page 128.

Please note:

If your phone is connected to a PABX,

see page 51.

To receive SMS messages you must be

registered with your service provider.

Writing/sending an SMS

Writing an SMS

SMS

Mailbox 2

Select mailbox if necessary

and press

§OK§

(page 49).

Enter mailbox PIN if necessary

and press

§OK§

New SMS

Select

and

press

§OK§

Write an SMS.

Sending an SMS

Press the talk key

or:

§Options§

Press the display key.

Send

Select and press

§OK§

Then:

SMS

Select and press

§OK§

Select number with area code

(even if you are in that area)

from the directory or call-by-

call list, or enter number

directly. For sending SMS to an

SMS mailbox: add the mailbox

ID to the

end

of the number.

§Send§

Press the display key.

The SMS will be sent as soon as your

phone's fixed line network connection is

free.

Please note:

– Entering text with and without EATONI pre-

dictive text is described from page 128.

– EATONI is activated as a default setting.

How to activate/deactivate EATONI,

see page 129.

Summary of Contents for Gigaset S675IP





































































































































































Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands

Siemens Gigaset S675IP, User Manual

Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands