Configuration
59
Building Technologies
048_CCDA1445_A6V10257135_V1.0_en
Fire Safety & Security Products
20.08.2009
4.
Move the cursor to set actions point select Y (Yes) or N (No) for alarm output
activating or not.
5.
Alarm duration: The alarm duration time can be set by change STOP TIME of
P1 from 1 sec to 120 sec.
Ö
When an alarm (1-4) is triggered, the respective action will be performed
10.3.2
PAN/TILT SETUP
AUTO FLIP
PROPORTIONAL P/T
SCAN LIMIT STOPS
MANUAL LIMIT STOPS
RECOVER TIME
AUTO PATROL
SCAN SPEED
STOP TIME
MAX SPEED
PRESET GROUP
MOTION MODE
MOTION SENSITIVITY
ON
ON
OFF
OFF
0 MIN
P1 OFF
5 DEG/S
P1 10S
400 DEG/S
1
OFF
MID
Menu item
Option settings
AUTO FLIP
The Auto Flip feature is found in some PTZ cameras which have a
180° tilt. It allows a moving target to be tracked when they move
directly underneath a security camera. Normally if a target moves
underneath the camera the image will be upside once it has passed
the 90° point.
What Auto Flip does is detect the position of the camera and
automatically flip the image to the correct orientation so that it will
always appear the right-side-up.
For security monitoring this allows quicker response time from the
camera as a conventional CCTV camera with a 90° tilt action will
have to rotate 180° before allowing the operator to continue
tracking the target. It also makes following a moving target much
simpler.
PROPORTIONAL
P/T
Proportional P/T controls the pan and tilt speeds according to the
amount of zoom.
In tele mode, the pan and tilt speeds will be reduced proportionally
so the image not moves too fast on the monitor.
SCAN LIMIT STOPS When a Scan Limit Stop is reached during random, frame or auto
scan, the high-speed dome camera will reverse direction. A Left
Manual Limit Stop and Right Manual Limit Stop can be set. The
limit stops must be more than 10 degrees apart.
MANUAL LIMIT
STOPS
When a Manual Limit Stop is reached during a manual joystick pan,
the camera will stop. A Left Manual Limit Stop and Right Manual
Limit Stop can be set. The limit stops must be more than 10
degrees apart.