Installation
39
Building Technologies
048_CCDA1445_A6V10257135_V1.0_en
Fire Safety & Security Products
20.08.2009
Unit: mm
26
6
14
0
230
Dimensions of indoor wall mount
1.
Use the template (1) to drill three holes in the wall with Ø ⅜” (9 mm), depth 1-
3/4” (40 mm).
2.
Hammer an expansion anchor (2) into each hole just drilled.
3.
Attach the wall mount (3) to the wall using the mounting screws (4).
4.
Feed the cables though the opening in the top of the wall mount.
5.
Connect the video cable, power cable and communication cables to the
connectors on the dome base (5).
6.
Attach the camera to the wall mount using the screws that were included with
the wall mount.
7.
Tighten the mechanical screws to fix the dome base (5) on the wall mount (3).
8.
Connect the support wire (7) to the hook (6) of the dome base.
9.
To lock the dome drive (8) to the dome base, line up the notch with the label
and turn the dome drive to the right using both hands.
10.
Decide which gap will be used for the dome cables, then fold superfluous parts
in the middle along the fold of both sides.
11.
Put the surface mount (10) on the wall mount.
12.
Use the fixing screws (9) to fasten the housing.
Ö
The installation is completed.