Configuration
55
Building Technologies
048_CCDA1445_A6V10257135_V1.0_en
Fire Safety & Security Products
20.08.2009
Menu item
Option settings
ALARM RETURN
AUTO: The return time can be set from 0 – 120 s, e.g. when the
time is set to 5 s and an alarm occurs, the camera will move to the
preset position and remain there for 5 s. Afterwards the camera will
perform its previous action.
OFF: indicates there is no action.
PICTURE FLIP
Flips picture 180° for desk applications.
WD
The Wide Dynamic Range (WDR) function of a camera is intended
to provide clear images even under back light circumstances where
intensity of illumination can very excessively, namely when there
are both very bright and vary dark areas simultaneously in the field
of view of the camera. WDR enables the capture and display of
both bright areas and dark areas in the same frame, in a way that
there are details in both areas, i.e. bright areas are not saturated,
and dark areas are not too dark.
10.3.1.1
FOCUS
MODE
ACTIVE TIME
INTERVAL TIME
SENSITIVITY
AUTO
5S
5S
NORMAL
Menu item
Option settings
MODE
MANUAL: The camera focus will be directly controlled with the near
and far controls.
AUTO: Pressing the near and far controls will place the camera in
manual mode until there is a zoom or pan/tilt function.
INTERVALL: The camera will switch between auto focus and manual
focus according to the Active Time and Interval Time respectively.
Active Time (auto) → Interval Time (manual) → Active Time (auto) →
Interval Time (manual)…
ZOOM TRIGGER: The camera remains in manual mode unless there
is a zoom function and will return to manual mode after the zoom
function is completed.
ACTIVE TIME
INTERVAL TIME
The interval and active times can be set from 1 – 255 s.
SENSITIVITY
The sensitivity of the Auto Focus can be set to NORMAL or LOW.