Setting and controlling the dome camera
45
Building Technologies
048_CCDA1445_A6V10257135_V1.0_en
Fire Safety & Security Products
20.08.2009
Physical
Number
(Keyboard)
Function
90 POS
For playing the fourth pattern tour
92 POS
Auto patrol group 2
93 POS
Auto patrol group 3
94 POS
Auto patrol group 4
9.3.1
Controlling the dome camera
Once Setup-OSD is displayed on the video output, navigation and parameter setup
can be performed using the following commands:
OSD function
PTZ command
OSD up
PTZ up
OSD down
PTZ down
Select parameter / next page
Focus near
Deselect parameter / page back
Focus far
9.3.2
Dome camera settings
9.3.2.1
Setting presets
Programming presets varies with the model controller being used. Please refer to
your model's instructions for information on inputting preset commands. When
using the CKA4820 keyboard, move the camera to the desired position and then
press the "preset number" followed by the "Mem" button. See page [
J
44]
Enter the desired preset number using the numeric keypad. Then press the "Pos"
button to perform the preset. See page [
J
44]
9.3.2.2
Playing preset groups
1.
Select the desired preset group
2.
Enter “Pos” 69, 92, 93 or 94 to play the presets shown in the following table.
Preset Group 1
Preset Group 2
Preset Group 3
Preset Group 4
69 Pos
1 to 64
1 to 32
1 to 18
1 to 16
92 Pos
-
33 to 64
19 to 36
17 to 32
93 Pos
-
-
37 to 64
33 to 48
94 Pos
-
-
-
49 to 64
Auto Patrol Preset Points