Chapter
7
Operating Instructions
Compact OMNI Scanner
7-2
©
SICK AG · Division Auto Ident · Germany · All rights reserved
8 009 237/0000/07-05-2002
Maintenance
Cleaning other optical surfaces:
¾
If an external reading pulse generator and/or object-height detection sensors are used
(e. g. photoelectric reflex switches), make sure to clean the relevant optical surfaces
(
Contamination on these surfaces can cause switching errors.
7.2
Maintenance
The CLX does not require any maintenance. Its self-monitoring functions ensure fault-free
operation over long periods of time.
Any faults or malfunctions are displayed on the terminal interface. The messages can be
displayed on the screen in the extended mode of the Terminal Emulator in the CLV-Setup
program. See
Chapter 8.2 Monitoring error and malfunctions, Page 8-1
7.3
Disposal
Irreparable devices or devices that are no longer required must be disposed of in an
environmentally-friendly manner:
1.
Always observe the applicable national waste disposal regulations.
2.
Remove the CLX housing.
3.
Remove the electronic modules.
4.
Remove the glass panel from the reading window and send it to be recycled.
5.
Send the chassis and cover (aluminium) to be recycled.
6.
Send the electronic modules for disposal as problem waste.
At present, SICK AG does not accept any unusable or irreparable devices.
Fig. 7-2:
Cleaning the external optical sensors (reading pulse generator, object-height detector)
Clean here
