SICK Omni CLX 490-0010 Operating Instructions Manual Download

Page: 115 / 152

Operating Instructions

Chapter

CLX 490

8 009 237/0000/07-05-2002

10-15

Appendix

10.6

Installing and operating the "CLV-Setup" program

The scope of delivery of the CLX includes a CD-ROM containing the "CLV-Setup" program.

The software can be installed on a PC with the following minimum configuration: 80486 pro-

cessor, 66 MHz, and 16 MB RAM, CD drive, serial interface and mouse (recommended) as

well as an operating system Windows 95

/98

, Windows NT

or Windows XP

. Approxi-

mately 26 MB of hard disk space is required to install CLV-Setup, CLV Assistant, CLV-Setup

Help, and I-ViewPro

offline browser.

10.6.1

Preparations

Make sure you have the CD-ROM at hand.

Connect the CLX to the AMV/S 60 Connection Module (see

Chapter 5.5.3 Connecting

the supply voltage, Page 5-13

Connect the PC to the terminal interface on the CLX using an RS 232 cable

(AMV/S 60: connect the PC to the internal 9-pin "Service" plug).

See

Chapter 5.5.6 Connecting the PC, Page 5-15

Switch on the power supply to the AMV/S 60.

Once the CLX has started, the "Device Ready" LED lights up.

Switch on the PC and start Windows.

10.6.2

Installing the software

The "CLV-Setup" installation program creates a directory "CLV", a series of subdirectories,

and the necessary links. A deinstaller is also installed automatically so that you can remove

the program from the PC at any time. As of version V 2.6, CLV-Setup will only be available

and further developed as a 32-bit application.

Initial installation

Close all Windows applications.

Insert CD-ROM in CD-drive.

Choose R

in Windows.

In the O

PEN

drop-down list, enter: "X:\setup.exe" (X = destination of drive).

Confirm the dialog box with OK.

– or –

Open Windows Explorer, open the CD-ROM drive and double click on the "setup.exe"

file.

The installation program is started and guides you step by step through the installation

procedure. The program asks you for your user name and company name. This

information appears as a header in printouts. The "CLV-Setup" software, CLV Assistant

and the CLV-Setup Help online help are installed according to the selected configura-

tion.

Install the I-ViewPro

HTML browser if necessary (the system asks you whether you

want to do so). If you choose not to install I-ViewPro

, the system searches your hard

disk for the Netscape Navigator

and uses it to display the CLV-Setup Help.

Please read the Readme file that contains the latest information and problems regard-

ing CLV-Setup.

Then confirm the installation message by clicking OK.

Restart the PC.

The Windows DLL files are possibly updated.

The "CLV-Setup" program and CLV-Setup Help are installed and ready.

Summary of Contents for Omni CLX 490-0010

























































































































































Search results

Summary of Contents for Omni CLX 490-0010

Reviews:

Related manuals for Omni CLX 490-0010

Brands by name

Popular brands

SICK Omni CLX 490-0010, Operating Instructions Manual

Search results

Summary of Contents for Omni CLX 490-0010

Reviews:

Related manuals for Omni CLX 490-0010

Brands by name

Popular brands