Chapter
10
Operating Instructions
Compact OMNI Scanner
10-34
©
SICK AG · Division Auto Ident · Germany · All rights reserved
8 009 237/0000/07-05-2002
Appendix
1 012 683
BMS 20-0113
Bus Connection Module for connecting a CLX 490 to an
Interbus-S
, for the CLX 490 without
heater, 15-pin D Sub HD device socket/plug. With 9-pin D Sub plug/socket (in/out) for the bus, ter-
minal strips (signal distributor) for connecting the data and function interfaces, internal 9-pin D Sub
"Service" plug, integrated power pack 230 V AC 50 Hz/ 24 V DC, strain-relief clamps, enclosure rat-
ing IP 30 (max. IP 54)
1 012 684
BMS 20-0112
As BMS 20-0113, with integrated power pack 115 V AC 50/60 Hz/ 24 V DC
6 025 757
BMV 10-0411
Bus connection module for connecting a CLX 490 to
Ethernet
.
TCP/IP communication, data transmission rate 10 MBit/s.
For the CLX 490 with a 15-pin D Sub HD device plug/socket. With a 8-pin RJ-45 bus socket, termi-
nal strips (signal distributors) for wiring the RS 232 data interface and the functional interfaces, a
internal 9-pin D Sub "Service" plug, cable grips, die-cast aluminum housing, enclosure rating max.
IP 54 (enclosure rating max. IP 65 with a plug hood), operating voltage 20to 30V DC
6 025 756
BMH 10-0411
Bus module for connecting a CLX 490 to
Ethernet.
TCP/IP communication, data transmission rate 10 MBit/s.
With terminal screws, a 8-pin RJ-45 bus socket, no housing, for top-hat-rail installation, enclosure
rating max. IP 20, operating voltage 10 to 30 V DC
6 022 140
BMV 10-0431
As BMV 10-0411, but with FTP communication, data transmission rate 10/100 MBit/s
6 025 748
BMH 10-0431
As BMH 10-0411, but with FTP communication, data transmission rate 10/100 MBit/s
6 007 655
–
Power cable for BMS 20, 3-wire, length 2 m, with 3-pin connector (grounding) and one open end
(stripped)
Order No.
Type
Description
Table 10-11: Accessories: bus connection modules
