SICK OD2000, Operating Instructions Manual

Page: 55 / 58

1) Alternative option for setting the switching point or analog value in the quick menu
1
Press the or pushbutton to record the current distance as a switching point or analog value.
2
Using the and pushbuttons, adjust the distance in 1/10-mm increments.
3
Press to confirm the input.
12.1.2 Menu structure in the main menu
Measurement menu group
/
Cycle time Measured
value filter Measuring
direction Measured
value offset ROI
near/far
(
Region of
interest
(ROI)
)
Error mode Substitute
value (
Error
mode )
Error sup‐
pression time
(
Error mode )
Q1 Output menu group
/
Q1 mode
(
Q1 Out‐
put )
SP1,
SP2, set
signal
threshold
(
Setting
the
switching
point
)
1)
Min./
Max.
Height
jump
(
Min. /
max.
height
change
)
Change
direction Cycle off‐
set Switching
point
logic Timer
mode timer set‐
ting Hystere‐
sis Tolerance
1) SP2 only available in the Window output mode.
Q2 / Q
a
output menu group
/
Q2 mode
(
Q1 Out‐
put )
SP1,
SP2, set
signal
threshold
(
Setting
the
switching
point
)
1)
Min./
Max.
Height
jump
(
Min. /
max.
height
change
)
Change
direc‐
tion Cycle
offset Switch‐
ing
point
logic Timer
mode timer
setting Hystere‐
sis Toler‐
ance Setting
analog
value
1) SP2 only available in the Window output mode.
IN Input menu group
/
IN Function Hold function IN Debouncing IN Input logic
Device menu group
/
Reset the
device Saving cus‐
tomer settings Language Display settings Sender Output
PNP/NPN/PP
Info menu group
Status information ( About )
RUN menu group
Open RUN menu.
12.2 Declarations of conformity and certificates
The declarations of conformity and certificates can be downloaded from the Internet at:
• www.sick.com/OD2000
ANNEX
12
8026231//2021-11-17 | SICK O P E R A T I N G I N S T R U C T I O N S | OD2000 55
Subject to change without notice