Select option
1.
Select parameters.
2.
Use the
and
pushbutton to select the desired option.
3.
Perform one of the following steps:
■
To save the setting, press the
pushbutton.
■
To cancel the process, press the
pushbutton.
4.
To return to the measured value display, press the
pushbutton until the meas‐
ured value is displayed.
Teaching value
1.
Select parameters.
✓
The display shows the current measured value.
2.
Align the device at the desired distance.
3.
To teach in the value, press the
pushbutton.
✓
The value is set to the current distance at the time the pushbutton is pressed. The
value is taught in.
Adjust the value
1.
Select parameters.
✓
The current value of the parameter is displayed. First digit on the left flashing.
2.
Set the flashing digit with the
and
pushbuttons.
3.
To confirm the digit and move to the next digit, press the
pushbutton.
✓
Next digit flashing.
4.
Set the other digits as described.
5.
To return to the previous digit, press the
pushbutton.
6.
Set the last digit. Confirm the entry with the
pushbutton.
✓
The value for the parameter is set.
7.
To return to the measured value display, press the
pushbutton until the meas‐
ured value is displayed.
Further topics
•
7.1.5
Activating and deactivating the operating button lock
To prevent accidental operation, lock and unlock the operating pushbutton using a
shortcut.
b
Press and hold the
and
pushbuttons simultaneously for > 3 seconds.
✓
When the pushbutton lock is activated,
Lock
appears in the display. When the
pushbutton lock is deactivated,
Unlock
appears in the display.
7.2
Operation via IO-Link
The device can exchange process data and parameters via IO-Link. To do this, connect
the device to a suitable IO-Link master.
Table 4: Properties of the IO-Link interface
IO-Link specification
V 1.1
Minimum cycle time
0.7 ms (COM3)
Transmission rate
COM3 (230.4 kBaud)
Process data width
48 bit outgoing (from device to master)
Process data type
Record
OPERATION
7
8026231//2021-11-17 | SICK
O P E R A T I N G I N S T R U C T I O N S | OD2000
23
Subject to change without notice