![background image](http://html1.mh-extra.com/html/sick/lsi-101/lsi-101_technical-description_1264568054.webp)
54
SICK LSI Technical Description - 06/98
•
In the list of available telegrams select the Read fault
memory telegram and click on Add.
•
Select the Read sensor status telegram and click on Add.
The two telegrams are now entered one under the other in the
list of telegrams for diagnosis.
•
Click on Run.
The fault memory of the LSI and the sensor status are read, and
the result log is displayed in the box at the bottom of the screen.
You can find out what the listed fault codes mean from the fault
table in section 10.2.
You can add supplementary information to the result log, print it,
or save it as a file.
Enter supplementary information:
•
Click on Input and enter the text you want. Your text is then
appended to the result log.
Print result log:
•
Click on Print.
Save result log as file:
•
Click on Save and enter a file name and destination
directory/folder.
Note:
When you have rectified the fault reset the LSI: choose
LSI - Initialize
.
Or execute the Reset and initialization telegram in the SICK
diagnosis.
The LSI system is then restarted.
Interrogate sensor fault memory
In some cases it may be necessary to interrogate the fault
memory of a sensor directly.
•
From the menu choose
LSI - Sick Diagnosis
and enter zero
as the device address and LSI as the device type, as
described above. Click on OK.
The Run Diagnosis dialog box appears.
•
Insert the following telegrams in sequence in the list of
telegrams to be executed:
Switch mode: Diagnosis mode
Set device and address
Read fault memory
Read sensor status
Set device and address
•
Click on Run.