30
SICK LSI Technical Description - 06/98
9.4 Expand configuration
This section shows you how you can expand your configuration
to meet specific requirements.
You can add sensors and monitoring areas, and work with
additional monitoring cases.
You can also change the inputs and outputs, as well as the
address, application variant and restart settings.
Note on the following subsections:
There are two basic means of expanding the standard
application, depending on the user category under which you
have logged on:
As an Authorized Client you are automatically guided
through all steps, as when creating a new configuration
(see section 9.3).
As SICK Service, you can only call up and change specific
settings. The following subsections describe this method.
Consequently, you do not need to work through this entire
section, but can go to the specific subsections relevant to
your application.
Log on additional sensors
•
From the menu choose
LSI - Configuration - Edit.
•
Or choose the Edit Configuration button from the toolbar.
•
Select the Sensors tab in the LSI Configuration dialog
box.
•
Click on Add.
•
Log on all sensors connected to your LSI in sequence, and
name them as you wish. You can log on up to four sensors.
