19
SICK LSI Technical Description - 06/98
9.3 Entry: The initial configuration
The LSI is shipped with certain pre-configured settings. This
section describes how you can adapt those settings to your
application.
•
Switch on your LSI system (it takes a few seconds to start
up).
•
Start the user software.
The following dialog box appears:
•
Click on Yes.
The PC receives the pre-configured settings and displays them
on-screen.
This dialog box appears.
To be able later to send the configuration and monitoring areas
to the LSI, you must log on as an Authorized Client.
•
Choose Authorized Client from the category list.
•
Enter the password SICK_PLS and click on Logon.
You are now logged on as an Authorized Client (see status bar
at bottom of screen).
Note:
Always log off when leaving your workstation! This will prevent
unauthorized persons from manipulating your LSI system.
