Parameters
back
Reset System
Maint Mode: No
Maintenance
Test Analog Out
Test Relay
maint
Parameters
back
Reset System
Maint Mode: No Yes
Maintenance
Test Analog Out
Test Relay
select
Parameters
back
Reset System
Maint Mode: No Yes
Maintenance
Test Analog Out
Test Relay
select
Figure 61: Activating/deactivating maintenance mode
9.6.3
Setting the test analog output
NOTICE
The device switches to maintenance mode as soon as submenu item "Test Analog
Out" is activated.
•
LED "Service" goes on.
•
The device switches back to measuring mode as soon as the right arrow button for
"back" is pressed in the submenu.
Submenu "Test Analog Out" serves to change the mA value for the analog output and
then check the value output.
NOTE
•
Zero Point:
see "Setting the signal: Live Zero", page 62
•
Upper output value:
see "Setting the signal: Upper output value", page 62
.
Parameters
back
Reset System
Maint Mode: No
Maintenance
Test Analog Out
Test Relay
maint
Parameters
back
Test Analog Out
Channel 1 : 04.0 mA
edit: enter
Parameters
back
select
Test Analog Out
Channel 1 : 04.0 mA
Parameters
back
select
Test Analog Out
Channel 1 : 04.0 mA
Parameters
back
Test Analog Out
Channel 1 : 06.0 mA
edit: enter
2 x
Parameters
back
Test Analog Out
Channel 1 : 06.0 mA
edit: enter
Figure 62: Setting the analog value
9.6.4
Test relay
Submenu "Test Relay" serves to test relays 1, 2 and 3.
9
MENUS
74
O P E R A T I N G I N S T R U C T I O N S | GM901-02
8008932/16YT/V4-0/2022-02 | SICK
Subject to change without notice
