1
Sender position
2
Receiver position
2.
On the sender, tighten the two nuts for horizontal adjustment (X) and vertical
adjustment (Y) so that the light point shown is positioned centered on the focusing
screen of the adjustment tube.
Ë
É
Align receiver
1.
On the receiver, tighten the two nuts for horizontal adjustment (X) and vertical
adjustment (Y) so that the light point shown is positioned centered on the focusing
screen of the adjustment tube
2.
Control the adjustment in both directions.
7.8
Fitting the sender and receiver on the T-piece
Figure 18: Fitting the sender and receiver on the T-piece
1
Sender
2
Receiver
3
Quick-release fasteners
Procedure
1.
Position the sender on the T-piece and fasten it with the quick-release fasteners.
2.
Position the receiver on the T-piece and fasten it with the quick-release fasteners.
7
COMMISSIONING
38
O P E R A T I N G I N S T R U C T I O N S | GM901-02
8008932/16YT/V4-0/2022-02 | SICK
Subject to change without notice
