1
About this document
1.1
Function of this document
These Operating Instructions describe:
•
System components
•
Start-up
•
Operation
•
Maintenance work required for reliable operation
•
Troubleshooting
1.2
Scope of application
These Operating Instructions are only applicable for the measuring device described in
the product identification.
They are not applicable for other SICK measuring devices.
The standards referred to in these Operating Instructions are to be observed in the
respective valid version.
1.3
Target groups
This Manual is intended for persons installing, operating and maintaining the device.
Operation
The device may only be operated by qualified persons who, based on their device-spe‐
cific training and knowledge as well as knowledge of the relevant regulations, can
assess the tasks given and recognize the hazards involved.
Installation and maintenance
Installation and maintenance may only be carried out by trained specialists familiar
with the installation conditions.
Please observe the information at the beginning of the respective Sections.
1.4
Further information
•
Purge air unit Operating Instructions
•
Final inspection record
NOTE
b
Observe all documents provided.
1.5
Symbols and document conventions
1.5.1
Warning symbols
Table 1: Warning symbols
Symbol Significance
Hazard (general)
Hazard through electrical voltage
ABOUT THIS DOCUMENT
1
8008932/16YT/V4-0/2022-02 | SICK
O P E R A T I N G I N S T R U C T I O N S | GM901-02
7
Subject to change without notice
