10.4.2
Maintenance Table for GPP measuring probe
Table 14: Maintenance intervals for GPP measuring probe
Interval
Maintenance work
Remarks
Half-yearly
Clean outer surfaces of measuring probe.
Clean optical surfaces.
As required
Exchange the sinter filter.
Exchange the heaters.
Exchange the optical parts.
10.4.3
Maintenance Table for purge air unit
Table 15: Maintenance intervals for purge air unit
Interval
Maintenance work
Remarks
Application-
dependent
(see mainte‐
nance
request)
Exchange filter element.
Part No. for filter element and task descrip‐
tion, see Operating Instructions SLV4.
Check the hose and hose clamp.
Task description, see Operating Instructions
SLV4.
Exchange the purge air filter.
Check fan motor noise.
Check the purge air heater (optional).
Check the function of the filter and differen‐
tial pressure sensor (optional).
10.4.4
Maintenance Table for GMP measuring probe
Table 16: Maintenance intervals for GMP measuring probe
Interval
Maintenance work
Remarks
Half-yearly
Clean outer surfaces of measuring probe.
Clean optical surfaces.
As required
Exchange the optical parts.
10.4.5
Final maintenance work
NOTE
Record all maintenance work done in a Maintenance Manual.
10
MAINTENANCE
78
O P E R A T I N G I N S T R U C T I O N S | GM901-02
8008932/16YT/V4-0/2022-02 | SICK
Subject to change without notice
