4.4.5
IO-Link......................................................................................
4.4.6
Muting....................................................................................... 41
4.4.7
Connection diagrams..............................................................
4.5
4.5.1
Test rod check..........................................................................
4.5.2
Visual check of the machine and the protective device........
5
Mounting............................................................................................. 49
5.1
5.2
Unpacking.................................................................................................. 49
5.3
Fitting the system plug.............................................................................
5.4
5.4.1
Mounting the QuickFix bracket...............................................
5.4.2
Mounting the FlexFix bracket..................................................
6
Electrical installation........................................................................ 60
6.1
6.2
System connection (M12, 5-pin).............................................................
6.3
System connection (M12, 8-pin).............................................................
6.4
Extension connection (M12, 5-pin).........................................................
7
Configuration..................................................................................... 65
7.1
7.2
Set to factory settings.............................................................
7.3
Configuration mode..................................................................................
7.4
Configuring beam coding.........................................................................
7.5
Configuring muting...................................................................................
7.6
7.7
Configuring the restart interlock..............................................................
7.8
Configuring external device monitoring (EDM).......................................
7.9
Configuring application diagnostic output..............................................
8
Commissioning.................................................................................. 74
8.1
8.2
8.3
8.4
Alignment of the active and passive units..............................................
8.4.1
Aligning the active and passive units.....................................
8.4.2
Alignment with the QuickFix bracket......................................
8.4.3
Alignment with the FlexFix bracket or with the replacement
bracket...................................................................................... 77
8.4.4
Indication of the alignment quality.........................................
8.5
Check during commissioning and modifications....................................
9
Operation............................................................................................ 80
9.1
CONTENTS
4
O P E R A T I N G I N S T R U C T I O N S | deTem4 A/P
8024782/2019-11-19 | SICK
Subject to change without notice