Important information
NOTICE
The housing of the multiple light beam safety device can become scratched if the screw
heads protrude when the FlexFix brackets are mounted on the back.
Avoid this by taking one of the following measures:
b
Use flat head screws.
b
If using cylinder head screws, use two screws per bracket and no washers.
NOTE
The FlexFix mounting kit (part number 2073543) contains 2 FlexFix brackets, one align‐
ment tool, and the required screws, sliding nuts, and washers.
Further topics
•
5.4.2.1
Mounting the FlexFix bracket on a machine or profile frame
Mounting method
Table 12: Lateral and rear mounting with the FlexFix bracket
mounting
method
Description
On the side
1)
With the M5 screw through the FlexFix bracket on the machine or profile
frame. A screw nut or threaded hole is required on the machine or profile
frame (
!
).
With the M5 screw through the FlexFix bracket on the profile frame. Two slid‐
ing nuts are required on the profile frame (
"
).
On the back
With the M5 screw through the FlexFix bracket on the machine or profile
frame. A screw nut or threaded hole is required on the machine or profile
frame (
§
).
1)
If the bracket is attached at the side, no muting arms can be mounted on the protective device.
5
MOUNTING
56
O P E R A T I N G I N S T R U C T I O N S | deTem4 A/P
8024782/2019-11-19 | SICK
Subject to change without notice