§
b
Tightening torque for the screws used to mount the bracket: 5 Nm … 6 Nm. Tight‐
ening torque for the screws used to secure the multiple light beam safety device in
the bracket: 2.5 Nm … 3 Nm (
$
). Higher torques can damage the bracket, while
lower torques are not secure enough to prevent the multiple light beam safety
device from moving.
$
2,5 Nm -
3 Nm
5 Nm -
6 Nm
b
Make sure that the active and passive units are aligned correctly. The optical lens
systems of the active and passive units must be opposite one another (
%
).
%
MOUNTING
5
8024782/2019-11-19 | SICK
O P E R A T I N G I N S T R U C T I O N S | deTem4 A/P
53
Subject to change without notice