SHP SHP2000iE, Manual

Page: 111 / 140

‐
110
‐

If the generators are overloaded, or if there is a short circuit in
a connected appliance, the OVERLOAD LED (red) 5 will light
up, and the current to the connected appliances will shut off,
and the READY LED (green) 4 will light up. Stop the
engines and investigate the problem.
8.2 STOPPING AC PARALLEL
Once the generators are no longer needed they can be shut down:
(1). Disconnect or turn off all electrical loads from the receptacles
of the Parallel Kit 2.
(2). Stop the engine in the following stages:

Turn the Fuel Tap to the “OFF” position.

Turn the Engine Switch to the “OFF” position.
(3). Allow the generator to cool before moving or storing.
NOTE
TURN OFF all electrical loads connected to the receptacles
of the Parallel Kit 2 before shutting down by Gen-mate APP
using a smartphone.
9. SPECIAL REQUIREMENTS
NOTE

DO NOT modify the generator in any way.