SHP SHP2000iE, Manual

Page: 96 / 140

‐
95
‐
5.6 USING THE CHOKE
Pull the Choke Knob 1 fully out to "START" position.
NOTE

The Choke is not required to start a warm engine. Push the
Choke Knob into the "RUN" position.

Usually keep the Choke Knob in "START" position for only 2
pulls of the recoil starter or 2 pushes of the electric start button.
After the second pull or push, push the Choke Knob into the
"RUN" position for up to the next 3 pulls or pushes. Too much
choke leads to Spark Plug fouling/engine flooding due to the
lack of incoming air. This will cause the engine not to start.

Keep the Choke Knob in the "START" position for more pulls
or pushes if the weather is cold.
1
"START" position "RUN" position