SHP SHP2000iE, Manual

Page: 107 / 140

‐
106
‐
hydrogen gas while recharging. Provide adequate
ventilation when charging or using batteries.

Wear protective goggles and gloves when working around a
battery. The Battery electrolyte is an extremely corrosive
sulfuric acid solution that can cause severe burns. Avoid
contact with skin, eyes or clothing. If a spill occurs, flush
the area with clear water immediately.
7.1 CONNECTING THE BATTERY CHARGING CABLE:
3
1
(1). Connect the Red Charger Clip 4 to the positive (+) battery terminal
and the Black Charger Clip 5 to the negative (-) one.
(2). Plug the Charging Cable 1 into the DC Receptacle 2 of the generator.
(3). Start the engine to charge the battery.
(4). Charging time will vary with the battery size and condition.
The rated
DC output power of the generator is about 100W. If the battery
capacity is 60Ah and the battery is charged from an exhausted state,
the charging time will be about 12 * 60 / 100 = 7.2 hours.
(5). The DC Circuit Breaker 6 DOES NOT prevent over-charging a
2
1
4
5
6
7