SHP SHP2000iE, Manual

Page: 126 / 140

‐
125
‐
(1). Turn the Fuel Cap Vent Lever to the the “ON” position.
(2).Turn the Fuel Tap to the “ON” position.
(3). Put the Drain Hose 1 into a suitable container.
(4). Loosen the Drain Screw 3 counterclockwise.
(5). Drain the gasoline from the Carburetor 2 into the container through
the Drain Hose 1.
(6). Tighten the Drain Screw 3 clockwise securely.
(7). Reinstall the Drain Hose 1 into the hole at the bottom casing.
(8). Reinstall the Maintenance Cover 4.
(9). Turn the Fuel Tap to the “OFF” position.
(10). Turn the Fuel Cap Vent Lever to “OFF” position.

Gasoline is highly flammable and explosive.

Keep heat, sparks, and flame away.

Handle fuel only outdoors.

Wipe up spills immediately.
11.4 ENGINE
(1). While the engine is still warm, drain the oil from the crankcase.
Refill with the recommended new oil.
(2). Remove the spark plug and pour about 15ml (1/2 ounce) of
engine oil into the cylinder through the spark plug hole on the engine
cylinder head, and cover the spark plug hole with a rag. Pull the
starting rope several times to coat the cylinder walls with engine oil.
(3). Install and tighten the spark plug.
(4). Pull the Starter Grip until you feel resistance, then stop pulling.
(This prevents the cylinder and valves from rusting)
(5). Clean the outer surface of the generator. Check that the cooling
air slots and openings on generator are open and unobstructed.
(6). Store the unit in a clean, dry place. If possible, store the unit
indoors and cover it to provice protection from dust and dirt.