SHP SHP2000iE, Manual

Page: 113 / 140

‐
112
‐
before cooling the engine.
Allow the engine to cool down.
If this is not done, the fuel tank can be crushed by cold
contraction of the fuel gas in the fuel tank.

Keep all cooling holes open and clear of debris, mud, water, etc.
Cooling holes are located on the front panel and the back cover
of generator. If the cooling holes are blocked, the generator
may overheat and damage the engine, inverter, or windings.

DO NOT remove any cover of the Generator Case when the
engine is running. If not, the inverter or other electric parts may
be damaged because of bad cooling.
10. MAINTENANCE
Periodic maintenance will keep your generator in the best operating
condition.

Read the instructions before you begin, and make sure you
have the tools and skills required.

Stop the engine to ensure that untimely start-up is not possible
before starting maintenance work.

To reduce the possibility of fire or explosion, be careful when
working around gasoline. Use a nonflammable solvent to clean
parts. Keep cigarettes, sparks, and flames away from all fuel-
related.
NOTE

If you are not familiar with maintenance work, have an
authorized dealer do it for you.

Use ours or equivalent quality parts for replacement. Ask an
authorized dealer for further attention.