‐
115
‐
Drain the used oil while the engine is warm. Warm oil drains quickly and
completely.
(1). Turn OFF the Fuel Tap, Close the Fuel Cap tightly and turn OFF the
Fuel Cap Vent Lever to reduce the possibility of fuel leakage.
(2). Open the Oil Maintenance Cover 1.
(3). Place a suitable Container 3 next to the engine to collect the used
oil, and remove the Oil Cap/Dipstick 2.
(4). Set fully the Oil Funnel 4 outside of the Oil Filler Neck 5, and drain
the used oil into the Container 3 by tipping the engine toward the Oil
Filler Neck 5.
(5). With the engine in a level position, fill to the UPPER LIMIT of the Oil
Filler Neck 5 with the recommended oil by the Oil Funnel 4.
Do not fill
with more than 0.35L of oil.
(6). Reinstall the Oil Cap/Dipstick 2 securely.
(7). Reinstall the Oil Maintenance Cover 1.
NOTE
Do not tilt the generator when adding engine oil. This could
result in overfilling and damage to the engine.
Improper disposal of engine oil can be harmful to the
environment. The used oil should be put in a sealed container,
and taken to a recycling station. Do not discard it in a trash bin,
dump it on the ground, or pour it down a drain.
0.35L
4
UPPER
LIMIT
LOWER
LIMIT
Summary of Contents for SHP2000iE
