SHP Laboklav 100 User Manual Download Page 12

Page: 12 / 54

User Manual

"Steam sterilizer Laboklav 55 - 195

Laboklav 160

Overall dimension (free standing unit) (W x H x D)….

840 x 1065 x 700 mm

Footprint (Bench top unit) (W x D)...............................

840 x 975 mm

Weight (netto)..............................................................

ca. 220 kg

Volume Feed Water tank.............................................

ca. 40 l

Maximum Load:

Instruments .....................

40 kg

Textiles ...........................

25 kg

Liquids...........……………..

45 Liter Total volume

Sterilizer chamber:

Total volume ................................................................

ca. 165 l

Chamber dimension (

x D)..........................................

500 x 760 (+50-round.) mm

Usable Volume....... ..................................................…

ca. 163 l

Maximum allowable pressure (PS)...............................

2.8 bar

Maximum allowable temperature (TS)..........................

138°C

Working pressure safety valve.......................................

2.8 bar

Material of chamber and double jacket..................…....

1.4404 (SS 316 L)

Surface roughness ……………………........................…

≤

0,8 µm

Pressure Device Directive 2014/68/EU.........................

CE0036, Kat. II, Modul B+C2

Power supply:
Voltage .........................................................................

3N 400V~ (

5%), 50 Hz, 16A

Power cord……..……….................................................

CEE-plug 16 A

Working power ...............................................................

10 kW

Averaged power consumption per cycle.........................

17 kWh

Protection class ......................…………………………...

Protection…......................…………………...…………...

IP24

Electromagnetic compatibility ..........……..………………

DIN EN 61326

Water supply:
Destilled or demineralized Water

(acc. to annex C EN 13060)

Averaged feed water consumption per cycle...................

ca. 5,5 l - 17 l

(depending on initial state, program and load)

Storing conditions:
Temperature...................................................................

40°C

Humidity ........................................................................

max. 85%

Heat emission to the environment.................................

ca. 12% of rated capacity

Programs:
10 predefined programs in user level 1:

The program definition depends on the available options included in the model. The programs
can be individually changed.

10 further programs in user level 2 (program P11 - P20) code protected, Predefinition is like P1.

2 test programs (Bowie & Dick-Test, P11, vacuum test, P12) - in vacuum versions only

Computer interface:
- serial interface RS 485

Printer (optional)

Summary of Contents for Laboklav 100























































Search results

Summary of Contents for Laboklav 100

Reviews:

Related manuals for Laboklav 100

Brands by name

Popular brands

SHP Laboklav 100, User Manual

Search results

Summary of Contents for Laboklav 100

Reviews:

Related manuals for Laboklav 100

Brands by name

Popular brands