50
User Manual
"Steam sterilizer Laboklav 55 - 195
"
1.) Setting printing paper:
•
Open the front cover of the printer.
•
Cut the edge of Printing Paper as the following drawing:
Figure 5: Cut the edge of the Printing Paper
•
Insert the paper into the paper insertion of the printer mechanism. When auto loading function
is specified, paper is loaded automatically. Otherwise push the LF switch until paper enters the
printer mechanism.
•
By holding the paper holder in the arrowed direction, insert paper roll and make sure paper
holder hold the core.
•
Eliminating slack on the printing paper, close the front panel.
•
To change paper, as holding the paper holder in the arrowed direction, re-move the core.
Remove, at this time, excessive paper by using the LF switch. After setting paper, press the
LF switch once. Then, printer goes to data input printing mode.
Figure 6: Setting Printing Paper
2.) Setting paper roll:
•
Remove the empty roll by holding the paper holder to the side.
•
Remove the empty roll core.
•
Remove excess paper by pressing the feed switch.
•
After loading the paper, press the feed switch again. This will put the printer in print mode
(see
→
previous point)
3.) Setting ribbon cassette:
•
Press on the eject button. Cassette is ejected.
•
A new ribbon cartridge can be inserted into the printer.
Figure 7: Setting ribbon cassette
paper holder
front cover
Knob
ribbon cover
