Shimano XTR Di2, Dealer'S Manual

Page: 24 / 94

24
INSTALLATION
Installation of the front derailleur
Band type
1
(A)
Install the front derailleur to the frame.
Temporarily fix the clamp bolt
(A) with
an Allen key.
(A)
Clamp bolt
2
(B)
(C)
(a)
Position the front derailleur so that the
flat part of the chain guide outer plate
(B) is directly above and parallel to the
largest chainring (C) .
Check that the distance (a) from the tip
of the teeth of the largest chainring is 1
to 3 mm.
After adjusting the position, tighten the
clamp bolt to the designated torque.
(B)
Chain guide outer plate
(C)
Largest chainring
Tightening torque
5 - 7 N·m
{44 - 61 in. lbs.}
NOTE
Do not position the chain guide as shown in
the illustration.