Shimano XTR Di2, Dealer'S Manual, Page: 29 / 94

To be continued on next page
29
INSTALLATION
Connection of the electric wires
„
Connection of the electric wires
Precautions for connecting electric wires
Use the Shimano original tool for installation and removal of the electric wire. When installing electric wires, do not forcibly bend the plug part. It may
result in a poor contact. When connecting electric wires, push them in until you feel and hear a click.
Set so that the projection on the
connector is aligned with the groove on
the narrow end.
(A)
Shimano original tool TL-EW02
(B)
Plug
NOTE
This is a small waterproof connector. Do not
repeat connecting and disconnecting it. The
waterproof section or the connecting section
may become worn or deformed, and the
function may be affected.
(B)
(A)
Connecting the shifting switch
1
(A)
Remove the cable cap (A) from the
shifting switch.
(A)
Cable cap