To be continued on next page
33
INSTALLATION
Installation of the battery
3
(A)
(a)
(B)
(b)
Tighten the bolt of the bottle cage to
secure the battery mount.
For a long type, use the accessory
zip tie
(A)
to secure the battery mount to
the frame.
If there is a mounting boss on the frame,
the battery mount can be secured to the
frame with a bolt.
(a)
When fixing with a zip tie
(b)
If there is a mounting boss on the
frame
(A)
Zip tie
(B)
Battery mount fixing bolt
(M4 x 15 mm)
Tightening torque
1.2 - 1.5 N·m
{11 - 13 in. lbs.}
< Installation of the battery cable cover >
1
Set the electric wire for the battery
mount into the groove in the electric
wire cover for the battery mount.
2
(A)
Place the accessory spacers
(A)
in
between the battery mount and the
frame and then secure them by
tightening the bolts.
(A)
Spacers
If installing the bottle cage, it is easier to
install it at this stage.
Refer to the Service Instructions for the bottle
cage for details on the tightening torques.
Summary of Contents for XTR Di2
