Shimano XTR Di2, Dealer'S Manual

Page: 19 / 94

19
INSTALLATION
Installing the system information display
„
Installing the system information display
Install the system information display or junction (A) first.
Replacing the clamp band
(A)
(B)
If using a handlebar with a thick
diameter, reinstall it using the included
ϕ 35 clamp band.
Remove the case fixing bolt (A) with an
Allen key and replace the clamp band
(B) .
(A)
Case fixing bolt
(B)
Clamp band
Tightening torque
0.6 N·m
{5.3 in. lbs.}
Installing to the handlebar
1
(B)
(A)
Insert the clamp band (B) of the system
information display (A) into the
handlebar.
(A)
System information display
(B)
Clamp band
2
(C)
Adjust the angle of the system
information display so that it is easy to
see, and then use an Allen key to tighten
the clamp bolt
(C) .
(C)
Clamp bolt
Tightening torque
0.8 N·m
{7.0 in. lbs.}
NOTE
Recommended installation angle of the
information display:
The angle of the display is between 15° to 35°
to the horizontal.
35 °
15 °