23
INSTALLATION
Installation of the front derailleur
Installation on rear suspension types
NOTE
When installing components on the surface of
a carbon frame/handlebar, check the
tightening torque recommended by the
carbon frame or component manufacturer to
avoid carbon material damage due to
excessive tightening or insufficient
component holding force resulting from
insufficient tightening torque.
Adjust so that there is a clearance of 1 - 3 mm
between the chain guide outer plate and the
largest chainring. (Common to all types)
*
Bicycles with rear suspensions may be
positioned differently between when a
rider is off the bicycle and on the bicycle.
By referring to the illustration, perform
installation and SIS adjustment with the
bicycle fixed in a riding condition.
Summary of Contents for XTR Di2
