Shimano XTR Di2, Dealer'S Manual, Page: 47 / 94

47
How to operate
Displaying and operating the system information display
(A) (B) (C) (D)
(E)
(A)
Battery level
(B)
Front derailleur
Gear position
(C)
Rear derailleur Gear position /
Adjustment level
(D)
Suspension setting
(E)
Operation mode
< (C) Rear derailleur Gear position / Adjustment level >
Setting mode Details
The display information varies depending on
the mode setting.
Shift mode The gear position of the rear derailleur is displayed.
Adjustment mode
When adjusting the front derailleur and rear derailleur, the
adjustment level is displayed.
< (D) Suspension settings >
Display Details
If the suspension settings are already confi gured, one of the
settings can be selected from the screen indications.
*1*2
If the suspension settings are not confi gured, the suspensions are
not connected, or the battery level is running low, the display
will be blank.
< (E) Operation mode >
Display Mode Details
Saver reset The protection function is reset.
Front derailleur / rear
derailleur
Adjustment
Adjustment setting is done in this mode. For the
setting procedure, contact a dealer or an agency.
Manual shift Gears are shifted manually in this mode.
Synchronized shift 1
The front gears are shifted according to the rear
gear position.
This setting mode is designed for riders with strong
legs.
Synchronized shift 2
The front gears are shifted according to the rear
gear position.
This setting mode is designed for courses with
considerable terrain variation.
Three types of front and rear suspension
combinations can be confi gured.
*
1 Suspension settings are confi gured in
E-tube Project. For details, consult a
dealer or an agency.
*
2 Depending on the type of suspension,
settings may be factory confi gured at the
time of shipment. Check the indications
displayed on the information display
screen, and if the arrows are displayed,
be sure to check the setting details.