Shimano XTR Di2, Dealer'S Manual, Page: 86 / 94

To be continued on next page
86
MAINTENANCE
Replacing parts - rear derailleur
< Installation >
1
(A)
(a)
(b)
Apply grease to the plate axle (A) .
(a)
Grease application area
Grease number:
Premium grease (Y04110000)
(A)
Plate axle
NOTE
Do not apply grease to
(b)
.
If the outer surface of the roller clutch with
non groove part gets grease on it, it will slip
and the friction function will not work.
2
(B) (C) Insert the plate axel and insert the tip of
the p tension spring
(B) into the groove
of the plate (C) .
(B)
P tension spring
(C)
Plate
NOTE
When installing the plate stopper pin, first
shift RD to a low position, and then install it.
3
(D)
(a)
(E)
(b)
Set the cam unit (D) as shown in the
illustration.
(a)
Projection
(b)
Uneven
(D)
Cam unit
(E)
Chain stabilizer
NOTE
Make sure the cam unit is not set as shown in
the following illustration.
Uneven
4
(F) Make sure that the plate unit cover
gasket
(F) is attached along the grooves
in the plate unit.
(F)
Plate unit cover gasket