Shimano XTR Di2, Dealer'S Manual, Page: 59 / 94

To be continued on next page
59
ADJUSTMENT
Adjustment of the front derailleur
8
Y X
(a)
X
Y
Adjust so that there is a clearance (a) of
0 to 0.5 mm between the chain and the
chain guide inner plate.
If shifting switch (X) is pressed once
while the initial setting condition is
active, the chain guide will move one
step toward the inside.
If shifting switch (Y) is pressed once, the
chain guide will move one step toward
the outside.
The guide pulley can move 16 steps
inward and 16 steps outward from the
initial position, for a total of 33
positions.
9
(a)
(b)
After adjustment, exit the adjustment
mode.
(a)
In the case of system information
display
Single-click the button (approx. 0.5
seconds) to switch from adjustment
mode to shift mode.
(b)
In the case of Junction (A)
Press the button at junction (A)
until the red LED turns off in order
to switch from rear derailleur
adjustment mode to gear shifting
mode.