Shimano XTR Di2, Dealer'S Manual

Page: 39 / 94

39
INSTALLATION
Installation of the battery
7
(O)
(P)
With the connecting terminal (O) side
facing up, insert the battery from the
upper part of the battery case.
Install so that the connecting terminal
opening
(P) is oriented as shown in the
illustration.
(O)
Connecting terminal
(P)
Connecting terminal opening
8
(Q)
Connect the electric wire to the battery
connecting terminal using the Shimano
original tool
(Q) .
(Q)
Shimano original tool TL-EW02
9
(R)
(S)
Install cap B (R) to the battery case, and
fix it in place using the supplied
mounting bolt
(S) .
(R)
Cap B
(S)
Mounting bolt (M3)
Tightening torque
0.35 - 0.45 N·m
{3.1 - 3.9 in. lbs.}
NOTE
Make sure that the electric wire is not pinched
by the cap.
< Removing the battery >
(A) (B) (C) (D)
(E) (F)
Remove the mounting bolt (E) and cap B
(A) from the battery case (D) .
Disconnect the electric wire (B) from the
battery (C) using the Shimano original
tool.
Insert a 2.5 mm Allen key (F) into the
hole in the cap A on the opposite side
and push out the battery.
(A)
Cap B
(B)
Electric wires
(C)
Battery
(D)
Battery case
(E)
Mounting bolt (M3)
(F)
2.5 mm Allen key