Shimano XTR Di2, Dealer'S Manual, Page: 48 / 94

48
How to operate
Displaying and operating the system information display
How to operate
After protection is completed, the system is automatically restored.
Saver reset
Shift mode Adjustment mode
Single click (0.5 seconds)
Double click
Pressing and holding down (5
seconds or more)
< Switching operating modes >
You can switch between operating modes with a single click (0.5 seconds).
< Switching selections in each mode >
Double-click to switch selections within the mode.
< Saver reset >
Pressing the mode button for at least five seconds when the protection function is operating will
reset the system connection and return to normal operation.
In cases where the rear derailleur is pressed in
by a strong impact such as when falling from
the bicycle, the protection function
intentionally cuts the transmission of power
between the motor and the link.
The rear derailleur does not operate when the
protection function is operating.
If this happens, pressing the mode button on
the system information display or the button
on junction (A) for 5 seconds or more will
restore the connection between the motor
and the link and the rear derailleur will start
operating normally. The connection can also
be restored manually. For details, contact the
distributor.